 |
| |
|
Polyethylene Bag
- Single-layer polyethylene film
- For packaging general parts
- Available in various colors and printable
- Available in various forms such as bags, rolls and sheets
- Available sizes for HDPE film: 5”-40” width and 20-100 µm thickness
- Available sizes for LDPE film: 3”-60” width and 30-150 µm thickness
|
|
|
 |
 |
HDPE800 : High-Density Polyetylene Film |
 |
|
|
|
| |
|
Properties :
- Produced from high-quality HDPE plastics resin (grade A)
- Density 0.949-0.985 g/cm3 (at 23 +/- 1 oC)
- Strong and can withstand high weight
- High heat tolerance
- Transparency: opaque
- Silicone-free, Amide-free, DOP-free and RoHS certified
- Could be used as food packaging FDA21 / CFR177.1520
|
|
|
|
|
LDPE900 : Low-Density Polyethylene Film |
|
|
|
|
| |
|
Properties :
- Produced from high-quality LDPE plastic resin (grade A)
- Density 0.915-0.925 g/cm3 (at 23 +/- 1 oC)
- Highly flexible and strong
- Transparent and glossy surface
- Silicone-free, Amide-free, DOP-free and RoHS certified
- Could be used as food packaging FDA21 / CFR177.1520
|
|
|
| |
|
Polyethylene Film Characteristic
| Property |
HDPE800 |
LDPE900 |
Unit |
Testing Standard |
| Density |
0.981 |
0.922 |
g/cm3 |
ASTM D1505 |
| Melting Point |
131 |
122 |
oC |
ASTM D2117 |
| Vicat Softening Point |
124 |
102 |
oC |
ASTM D1525 |
| Brittleness Temperature |
- |
-70 |
oC |
ASTM D746 |
| Tensile Strength |
59 |
27 |
MPa |
ASTM D882 |
| Elongation at Break |
483 |
1143 |
% |
ASTM D882 |
| Thickness |
40 |
40 |
µm |
ASTM F2251 |
|
|
|
|
 |
